Use of hand tools in ict/computer

Examples: 1. Lint-free cloth 2. Compressed air 3. Cable ties 4. Cleaning Tools 1. Lint-free cloth — used to clean different computer components without scratching or leaving debris. Compressed air — used to blow away dust and debris from different computer parts without touching the components. Cable ties — used to bundle cables neatly inside and outside of a computer. Parts organizer — used to hold screw, jumpers, fasteners and other small parts and prevents them from getting mixed together.

Cleaning Tools 2. Cleaning Tools 3. Cleaning Tools 4. Diagnostic Tools Computers are easier to use and more dependable with each new generation of hardware and operating system update, but that doesn't mean they're problem-free. Here's the most popular tools for diagnosing your computer problems: 1. Multimeter 2. Diagnostic Tools 1. Multimeter — used to test the integrity of circuits and the quality of electricity in computer components.

Loopback Adapter — used to test the functionality of computer ports. Diagnostic Tools 2. Give the name of the tools Select the letter of the correct answer. Write your answers on a separate sheet of paper.

Which tool is used for hardware to stand on to prevent static electricity from building up? Anti-static mat c. Philips head screwdriver b. Hex driver d. Wire cutter 2. Which tool is used to loosen or tighten cross-head screws? Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens screws? Wire cutter 4. Which tool is used to strip and cut wires? Which tool is used to retrieve parts from location that are too small for your hand to fit?

Part Retriever c. Cable ties b. Lint-free Cloth d. Flat head screwdriver 6. Which tool is used to clean different computer components without scratching or leaving debris? Which tool is used to bundle cables neatly inside and outside of a computer? Flat head screwdriver 8. Which tool is used to loosen or tighten slotted screws? Which tool is used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on laptop?

Torx screwdriver d. Wire cutter Which tool is used to blow away dust and debris from different computer parts without touching the components? Compressed air b. When obtaining the tool, all the associated tooling and consumable parts, as recommended by the manufacturer, must be included.

The safe use of a tool depends on using the tool for the purpose for which it was designed and also for other purposes where it can be used as substitute where tool is not available. All tools should be kept in good condition with regular maintenance. Preparing for a task includes only knowing the task to be done.

Preparing for a task includes also the sequence of tasks to be done. The antistatic wrist strap is a conductor that connects your body to the equipment that you are working on. Je-Jireh Silva Wrap the strap around your wrist and secure it using the snap or Velcro.

The metal on the back of the wrist strap must remain in contact with your skin at all times. Je-Jireh Silva 2. Snap the connector at the end of the wire to the wrist strap, and connect the other end either to the equipment or to the same grounding point that the antistatic mat is connected to.

The metal skeleton of the case is a good place to connect the wire. The wrist strap has two parts and is easy to wear: A painted surface does not conduct the electricity as well as unpainted metal. Hardware devices can be classified into four distinct categories: Input devices: For raw data input.

Storage devices: For data and information retention. Input Devices. Processing Devices. Output Devices. What are the IT tools? So, we have put together a list of tools we have found useful and hope you will too. For a lot of IT professionals, setting up new systems can be a large part of the job. PC Decrapifier. Darik's Boot and Nuke. Sysinternals Suite. What are maintenance tools?

They consist of a series of elementary tasks such as data collections, visual inspections, cleaning, lubricating, and tightening screws.

What is the basic hand tools? Categories of hand tools include wrenches, pliers, cutters, files, striking tools, struck or hammered tools, screwdrivers, vises, clamps, snips, saws, drills and knives. Outdoor tools such as garden forks, pruning shears, and rakes are additional forms of hand tools. Portable power tools are not hand tools. What is hardware and software? However, these are mostly used in collaboration with the ones I discussed earlier.

There are many ICT tools that can be implemented successfully in a learning environment. Learning environments in early childhood can now be indoor and outdoor, so these tools can have quite an extensive range. How to choose meaningful ICT tools and resources. How do students learn with ICT tools? Check defective hand tools to be used. Examine and clean the hand tools. Never use Personal Protective Equipment.

Select faulty hand tools. Question 3. Which of the following computer hardware is used to prevent ESD?

Question 4. Cleaning tools. Diagnostic tools. Hand tools.